|
Shimano Hydraulic Tubing & Fittings
- Tubing kits include fittings: Shimano brand mineral oil (no DOT 3/4)
- BH96 includes: cut-to-fit length of hydraulic tubing with 1) pre-installed 90-degree banjo fitting and 1) XTR replaceable banjo fitting kit, 2) hollow banjo bolts with 3mm broach heads, 4) banjo sealing o-rings, and installation instructions
- BH63 includes: cut-to-fit length of hydraulic tubing; 1) pre-installed 90-degree banjo fitting with 1) hollow banjo bolt, and 2) banjo sealing o-rings; plus 1) replaceable 0-degree (in-line) fitting kit with barb fitting, compression ferrule and nut, and nose-cone cover; and instructions
- BH59 includes: cut-to-fit length of hydraulic tubing with 1) pre-installed inline (0-degree) fitting and 1) replaceable inline fitting kit, 2) tubing needle inserts, and installation instructions
- Banjo fitting kit includes: 1 90d banjo fitting, 1 compression nut, and 1 brass tubing insert with compression ferrule (hollow banjo attachment bolt and o-rings sold separately, use: SH-65810). Can also can be used for older XT-M755 levers (with black polyamid tubing) or as replaceable 90d kit for most Shimano brake caliper fittings
- Banjo bolt/o-ring kit includes: 1 hollow banjo bolt, and 2 o-rings
|
$7.95 |
|
Shimano Rotors and Rotor Mounting Parts
- (IS): 6-bolt/44mmBCD International Standard, (CL) 35mm CenterLock spline-mount, (O/CL): 47mm Oversized-CenterLock spline-mount
- All rotors include hardware: either 6-bolt or CenterLock lockring+washer
- RT97 (XTR-M975) rotors will work for older RT96 (XTR-M965/6) applications
- RT79/RT78 rotors are for Saint/XT-level CenterLock applications (replaces older RT77 model)
- RT75-series 6-bolt rotors can be used with Hone,LX,SLX,XT,Saint,and XTR disc brakes (RT61 6-bolt rotor should be used for Deore level and below)
|
$5.95 |
|
Shimano Master Cylinder and Lever Parts
- Shimano hydraulic brake lever assemblies are cross-compatible: if lever not listed, sub different model and verify needed tubing kit/fittings
- Replacement MC/lever assemblies do not include tubing (sold separately)
- Reservoir kits include: reservoir cover, bladder/gasket, and screws
|
$5.95 |
|
Shimano Shop Quality Bleed Tool
- Bleeding tool for all current Shimano hydraulic disc brake systems
- Designed for mineral oil (do not use with other fluids, i.e. DOT)
- For bleeding from the caliper up through the master cylinder/lever
- Includes: 60ml syringe with tube (for caliper), Shimano-logo capture bottle, and master cylinder reservoir sealing grip-clamp with bleed port (for lever)
- Does not include fluid, use: SH-65620 (50ml) or SH-90809 (1 Liter)
|
$86.95 |
|
|
Shimano Hydraulic Line Guide
- Molded plastic guides for securing disc brake tubing to existing frame cable stops or cable guides
- Black, sold in pairs
|
$5.95 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|
Shimano Bike Disc Parts