Bike Stems products
|
Atomlab GI Stem
- Heavy duty forged aluminum, 4-bolt faceplate with 6mm bolts. 210-370g
|
$29.95 |
|
FSA Ozzie BMX Stem
- Forged, CNC machined 7050 aluminum body
- 4 bolt aluminum faceplate. 2 bolt steerer clamp. 162g
|
$65.99 |
|
Alpha Q ProLite Stem
- ProLite stem is in a league of its own, with Q-wall technology
- Extra material is used along the sidewalls to increase torsional stiffness without any reduction to vertical compliance. This ensures a smooth ride over rough roads while resisting the twisting load of climbing and sprinting
- 7075 alloy with advanced 3-D forging process
- Flip-floppable. 100g-110g
|
$42.99 |
|
Axiom DH Stem
- Welded A5 aluminum for optimal strength vs. weight. 4-bolt faceplate
- 190g
|
$24.95 |
|
Axiom XC Stem
- One-piece cold forged A5 aluminum for optimal strength vs. weight
- 4-bolt faceplate. 170g
|
$17.95 |
|
Azonic Revenge Stem
- CNC machined 6061 aluminum, 6 bolt bar clamp, 307g (40mm)
- Formerly called the Aggro stem
|
$49.99 |
|
Blackspire Big Block Stem
- One-piece CNC machined 6061 aluminum
- 4-bolt faceplate (25.4mm), 6-bolt faceplate (31.8mm). 295g
|
$50.95 |
|
Control Tech Unit Carbon Stem
- Torsionally rigid hollow monocoque carbon composite construction
- 6/4 titanium hardware, 4-bolt carbon bar clamp. 136g
|
$217.95 |
|
Control Tech FX Stem
- Lightweight Freeride stem with forged, CNC machined 7075 alloy body
- Special oversized 7075 alloy bolts, plus windowed steerer clamp. 135g
|
$62.95 |
|
Control Tech Tandem Stoker Stem
- Tandem specific forged, welded 6061 aluminum with telescoping boom
- 29.8mm clamp mounts to captain's seatpost (may have to be shimmed)
|
$57.95 |
|
Deda Elementi Newton 31 Road Stem
- 1-piece, CNC machined 2024-T3 aluminum main body construction
- 6/4-titanium hardware with removable, 4-bolt aluminum faceplate
- Flip-flop design for 82-degree or 98-degree use
- 1" threadless or quill-spud adaptable (parts available separately)
- 125g @ 120mm: matte black/silver with screened flip-flop graphics
|
$137.95 |
|
Deda Elementi Newton Pista Stem
- 1-piece, CNC machined 2024-T3 aluminum main body construction
- 6/4-titanium hardware with removable, 4-bolt aluminum faceplate
- Deep drop 67 degree angle for track use
- 1" threadless or quill-spud adaptable (parts available separately)
- 125g @ 120mm: matte black/silver with screened silver/white graphics
|
$159.95 |
|
Deda Elementi Zero100 Servizio Corse Road Stem
- 3D forged and machined 2014 aluminum construction
- 6/4-titanium hardware with removable, 4-bolt aluminum faceplate
- 1" threadless or quill-spud adaptable (parts available separately)
- 105g @ 110mm: polished, dark metal (DuraAce-esque) finish
|
$144.95 |
|
Deda Elementi Zero100 Road Stem
- 3D forged and machined 2014 aluminum construction
- Stainless steel hardware with removable, 4-bolt aluminum faceplate
- 1" threadless or quill-spud adaptable (parts available separately)
- 115g @ 110mm: matte black finish
|
$86.95 |
|
Deda Elementi Ultracarbon Road Stem
- Carbon wrapped aluminum construction with removable 4-bolt/split faceplate
- Flip-flop design for 82-degree or 98-degree use
- 1" threadless or quill-spud adaptable (parts available separately)
- 165g @ 120mm: gloss carbon/black with screened flip-flop graphics
|
$101.95 |
|
Deda Elementi Quattro Stem
- 1-piece, drop-forged/machined 6061-T6 aluminum construction with removable 4-bolt faceplate
- Flip-flop design for 82-degree or 98-degree use
- 1" threadless or quill-spud adaptable (parts available separately)
- 169g @ 120mm: matte black with screened flip-flop graphics
|
$47.95 |
|
Deda Elementi Newton 26 Road Stem
- 1-piece, CNC machined 2024-T3 aluminum main body construction
- 6/4-titanium hardware with removable, 4-bolt aluminum faceplate
- Flip-flop design for 82-degree or 98-degree use
- 1" threadless or quill-spud adaptable (parts available separately)
- 125g @ 120mm: matte black/silver with screened flip-flop graphics
|
$108.95 |
|
Deda Elementi Logo Road Stem
- 1-piece, drop-forged/machined 6061-T6 aluminum construction with removable 2-bolt faceplate
- Flip-flop design for 82-degree or 98-degree use
- 1" threadless or quill-spud adaptable (parts available separately)
- 178g @ 120mm: matte black with laser etched flip-flop graphics
|
$27.95 |
|
DMR Headstock Stem
- Premium quality, CNC machined stem ideal for hardcore riding styles
- Twin collet locking system means there are no bolts or weak points at the rear of the stem
|
$57.95 |
|
FSA OS-99 CSI Stem
- Lightweight 3K carbon wrapped, forged, CNC machined 7050 aluminum
- 6/4 titanium hardware. Flip-flop graphics. 4-bolt alloy faceplate. 2-bolt steerer clamp. 118g
|
$179.99 |
|
FSA OS-99 Stem
- Superlight near-net forged, CNC machined 7050 aluminum
- All sharp edges have been radiused to eliminate stress concentrations
- 6/4 titanium hardware (washers and counterbores are all radiused too)
- 4-bolt alloy faceplate. 2-bolt diagonal cut steerer clamp. 98g
|
$109.99 |
|
FSA OS-115 Ti Road/Mtn Stem
- One-piece forging for optimal grain alignment
- CNC machined 7075 aluminum for maximum tolerance control
- 6/4 titanium hardware. 4-bolt carbon fiber faceplate
- Flip/floppable: Road (84 degree) or Mountain (6 degree). 130g
|
$134.99 |
|
FSA XC-150 Stem
- 3D forged, CNC machined 6061 aluminum, plated CrMo bolts
- For MTB use. 4-bolt forged alloy handlebar clamp. 150g
|
$43.99 |
|
FSA OS-190 Stem
- Lightweight 3D forged, CNC machined 6061 aluminum, plated CrMo bolts
- For MTB or Road use. 4-bolt forged alloy handlebar clamp. 155g
|
$29.99 |
|
Funn Rippa Stem
- Forged, CNC machined 6061 aluminum
- 4-bolt bar clamp. 2 opposing bolt steerer clamp
|
$28.95 |
|
Gravity Lite Stem
- Freeride strong CNC machined aluminum
- 4-bolt CNC 2014 alloy front clamp with CrMo hardware. 195g (90mm)
|
$89.99 |
|
Gravity DH Stem
- Cold-forged, CNC machined AL6061/T6 with ball-milled CNC detail
- 46mm tall 3-bolt steerer tube clamping and 4-bolt cold-forged front clamp
- 290g
|
$69.99 |
|
Gravity GAP Stem
- Box section 3-D forged, CNC machined AL6061-T6 body
- 4-bolt cold-forged front clamp with CrMo hardware. 230g (90mm)
|
$38.49 |
|
Gusset Fat SOD Stem
- Internally and externally CNC machined 6061 aluminum
- Extra wide 50mm faceplate with four 6mm stainless steel bolts
- Opposing bolts on steerer clamp (45mm stack). 275g
|
$74.95 |
|
Hope Stem
- 1-piece, CNC'd 2014-T6 aluminum construction with 3D milling relief
- Opposed 2-bolt steerer clamp with 4-bolt removable faceplate
- Compatible with Hope stem-mount lighting kits *(faceplate for mounting light and battery pack sold separately: see lighting section)
- 165g (110mm)
|
$91.95 |
|
Interloc F4 Riser Stem
- Cold forged TIG welded aluminum for Mountain and Road
- Opposing 2 bolt clamp with 4 bolt face plate. 185g
|
$33.95 |
|
ITM Uniko-White Carbon Road Stem
- Silver-mesh carbon fiber weave
- High-modulus carbon fiber construction with differentiated layering
- Patented GWS (grip wedge system) internal bar and steerer clamp (eliminates external pinch bolts and slotted clamps)
- Includes carbon stem/steerer cap and 1" steerer reducer shim
- 155g @ 100mm
|
$361.95 |
|
ITM 100% Road Stem
- CNC machined 7075 aluminum for the ultimate in lightweight strength
- 2-bolt steerer clamp (38.4mm height) with a 4-bolt removeable faceplate
- Quill-spud adaptable: 1-1/8" threadless to 1" quill (available separately)
- Includes reducer shim for use with 1" threadless steerers
- 99g @ 100mm: gloss black and white finish with red graphics
|
$320.00 |
|
ITM K-Sword Carbon Road Stem
- High-modulus carbon fiber construction with differentiated layering
- Patented GWS (grip wedge system) internal bar and steerer clamp (eliminates external pinch bolts and slotted clamps)
- Includes carbon stem/steerer cap and 1" steerer reducer shim
- 155g @ 100mm
|
$325.00 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|