Grips for BMX and MTB Bikes
|
Ergon GR2 Grips with Carbon Bar End - Compact, lightweight 3-finger full carbon fiber bar end - Wide, ergonomic grip shape prevents numbness and fatigue by supporting more of the palm and reducing pressure on the ulnar nerve - Integrated clamp secures grip on bar with just one screw - Bar end and grip platform adjust independently for custom fitting - Unisex grips with 2 sizes to fit small or large hands and 2 lengths for standard shifters or twist shifters |
$119.95 |
Ergon GR2 Grips with Magnesium Bar End - Same as the GR2 Carbon except the bar end is made of 100% magnesium |
$49.95 |
3 more products available from Ergon |
Gusset Bastard Grips - 130mm long bastard file-type knurling pattern, thin-wall soft rubber - Short flange for BMX or Mtn, open end, plastic expander plugs included |
$7.95 |
Intense Lock-On Grips - Aluminum clamps secure the grip on both ends using hex wrench - Loosen pinch bolts and grips slide on or off with ease - Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs |
$11.95 |
Lizard Skins Moab Grip - Dual compound, can be cut down for twist shifters, includes plugs |
$6.95 |
Lizard Skins Lock-On Bonus Pack - Rigid plastic grip core interlocks with clamps on either end |
$27.50 |
2 more products available from Lizard Skins |
ODI Lock-On MTB Bonus Pack - Aluminum clamps secure the grip on both ends using hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters = use 90mm replacement grip options for twist shifters) - Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs - Gold is a Limited Edition run |
$20.95 |
ODI Lock-On MTB Grips Only - Rigid plastic grip core interlocks with clamps on either end - Two sizes available: 130mm for standard, or 90mm for twist shifters - Includes end plugs |
$11.95 |
6 more products available from ODI |
OURY Grips - Thick profile and raised square blocks with a sticky feel, 98g |
$9.75 |
OURY Flanged Grips - Thick profile and raised square blocks with a sticky feel - Classic Oury grip with motocross style flange |
$9.75 |
1 more products available from Oury |
Pedros Dot Grips - Made of 65% recycled material - Raised and textured Oval-dot pattern provides a more positive hold and better comfort for extreme riding |
$7.95 |
Pedros Diamond Dueler Grips - Thin dual density rubber |
$6.95 |
1 more products available from Pedros |
Race Face Good-n-Evil Grips - Dual density compound with soft outer grip and firm inner core - Ergonomic shape is thicker at mid-section. Closed end |
$10.95 |
Race Face Diabolus Lock-Ons - Dual density compound with soft outer grip and moto grip flange - Rigid plastic grip core interlocks with clamps on either end - 130mm length, black clamps included - Replacement grips without clamps available to fit any ODI Lock-On clamps |
$11.95 |
Ritchey TrueGrip 6 Dual-Ply Grips - No-slip Kraton rubber, bulged center conforms to shape of hand |
$7.95 |
Ritchey WCS Ergo TruGrips - Soft, lightweight neoprene foam with palm fitting bulge. 36g |
$7.95 |
1 more products available from Ritchey |
S&M Lock-On Flanged Grips - Alloy clamps interlock with grips rigid inner plastic core - Low, flexible flange. Thin profile with ribbed surface, 143mm long - Bonus Pack includes black clamps and grip-overlapping end plugs |
$11.95 |
SRAM Stationary Grips - SRAM Racing grips: stationary, bar grips (not shifter grips) - 60mm: HalfPipe, 110mm: Shorty, 130mm: Triggers |
$6.00 |
Sunline Logo Lock On Grips - Mid-size flange for better feel and more control - Locking mechanism is hidden in the flange - Aluminum bar cap is part of the grip |
$17.95 |
Sunline Twisted Waffle Lock On Grips - Mid-size flange for better feel and more control - Locking mechanism is hidden in the flange - Aluminum bar cap is part of the grip |
$17.95 |
Syntace Screw-On Gripz - Non-slip, dual-density Kraton exterior with a one-bolt locking system - Grips can be installed and removed in seconds with a hex wrench - Can be cut down for use with twist shifters. 92g/pr |
$24.00 |
THE Vice Grips - Anatomically designed locking grip with alloy clamps and allen bolts - 3-way convertible flanges including large BMX, half cut, and reducer |
$18.95 |
Velo ViseGrips - Hex screws and aluminum clamps secure grip to bar without adhesives - Polypropylene inner sleeve covered with soft Kraton Gel |
$5.95 |
WTB MotoTec Clamp-On Grips - Locking ends with soft Kraton rubber grip area, open ends |
$20.00 |
WTB 4-Front Clamp-On Grips - Locking ends with 8-sided soft Kraton rubber grip area, open ends |
$20.00 |
3 more products available from WTB |
Yeti Lock-On Grips - Aluminum clamps secure the grip on both ends using hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters) - Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs |
$11.95 |
Yeti Hardcore 2-Ply Grips - Soft outer ply with more rigid inner ply. 71g |
$10.95 |
1 more products available from Yeti |