Bike Tapping and Bike Threading Tools

Eldi Bike Tapping and Bike Threading Tools

Eldi Pedal Tap/Bushing Kit - For repairing/replacing 9/16" pedal threads in alloy cranks - Specially designed, oversized 5/8" pedal taps prepare damaged threads for 9/16" bushing/insert installation - Kit includes: 1-right and 1-left 5/8"x24tpi crank/pedal taps; 6-right and 6-left crankarm inserts (additional inserts available separately)

$5.95

General Tools Bike Tapping and Bike Threading Tools

General Tool T-handle Tap Wrench - Self centering, hardened tool steel tap jaws - Knurled chuck sleeve for secure tool fitment - Sliding T-handle for tight spaces and extra leverage - Fits tap end sizes 1.6mm-6.3mm (No. 0 to 1/4") - 2-3/4" (70mm) tool length

$15.95

IceToolz Bike Tapping and Bike Threading Tools

IceToolz Frame Taps - LF-8707: For rear wheel drop out alignment screws - LF-8709: For water bottle, toe clip, fender and rack bosses - LF-8711: For cantilever brakes and large fender bosses - LF-8713: For derailleur hanger

$7.95

Loctite Bike Tapping and Bike Threading Tools

Loctite Form-A-Thread Repair Kit - Form-A-Thread stripped thread repair kit - Permanently repairs stripped threads and fasteners - Works on threads up to SAE Grade-5 and/or 8.8 metric - Allows up to 128 ft-lb torque applications once cured - Dual-compound "mixing" formula and cure compounds - Instructions, applicator, and mixing tools included - Five minute fix

$15.95

Loctite 660 Quick-Metal Gap Filler - Creamy, non-running gel compound used to fill surface imperfections and repair worn areas - Use to "gap-fill" press-fit parts and obtain the full-contact fit required for proper part mating (headsets, BMX bottom-brackets, cartridge bearings, etc) - Cures to strength double of standard press-fit - 10 minute fixture set with full-cure within 24 hours

$11.95

Park Tool Bike Tapping and Bike Threading Tools

Park Tool Crank Arm Pedal-Axle Taps - High carbon, precision ground, hardened steel - Designed to clean-up/restore pedal threads in crank arm - Can be used in steel or alloy crank arms - Includes both left (reverse-thread) and right taps - Tap handle not included (use GT-0166)

$28.95

Park Tool Frame/Dropout Tap - High carbon, precision ground, hardened steel - Designed to clean-up/restore frame/dropout screws - Can be used on steel or alloy - Includes Metric 3mm x .5 tap (tap handle not included use GT-0164)

$8.95

3 more products available from Park Tool

Featured products

• Delta Airzound Bike Horn 
  - 115 decibel horn with volume control switch
  - Mounts to most handlebars. No batteries needed
  - Air reservoir is easily refilled with any bike pump
  - Extension allows for more versatility when mounting system
• Campagnolo BIG Corkscrew 
  - A true classic, and symbol of genius for an iconoclastic brand
  - Patented telescopic, self-aligning system always centers the screw in the center of the cork
  - Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
  - Includes a wooden case with vinyard-esque packing material
• Kenda Standard Butyl Tube 
  - Standard .85mm wall thickness butyl tube
• Maxxis Xenith 26" Tire 
  - Mountain bike specific slick tire for 26" cross training
  - 60 tpi casing, 70a durometer: Durable, fast rolling compound
• Planet Bike Freddy Fenders Hardcore Fender Set 
  - Superflex unbreakable all-weather polycarbonate
  - Pre-installed stainless steel hardware with mud flaps
  - Includes all hardware for mounting to virtually any bike
• OURY Grips 
  - Thick profile and raised square blocks with a sticky feel, 98g