|
Avid Disc Brake Adapters and Hardware
- Adapts Avid 74mm caliper to fit various forks/frames and rotors
- Adapters do not include CPS mounting hardware, if needed use: AV-630222 or AV-6303
- IS: 51mm international standard / PM: 74mm post-mount / QR: quick-release / TA: thru-axle
- For Fox-40, use AV-630192 (160mm) bracket with 203mm rotor kit
|
$4.00 |
|
Avid Rotors and Rotor Mounting Parts
- G3 Clean Sweep rotor supplied with Elixir brake models (same fearures as G2 Clean sweep, but updated for 2009+)
- G2 Clean Sweep rotor for all Avid, Juicy and Code hydraulic disc brakes: features Clean Sweep edges that keep pads clean while providing maximum stopping power and cooling (Polygon and Original-round rotors discontinued in 2007 for newer G2 design)
- Roundagon rotor for '05+ BB-5 *(and '06+ BB-7) mechanical disc brakes
- 165mm rotors for 00/01 Avid disc brakes are no longer available
- International Standard 6-bolt (44mm BCD) rotor pattern
|
$6.00 |
|
Avid Hydraulic Tubing & Fittings
- Cut-to-fit tubing kits for front or rear applications: sold each (banjo/caliper bolt; bleed kit; and/or DOT fluid sold separately)
- '05+ Juicy Ultimate/Carbon/7/5 kit includes: 2000mm tubing with pre-crimped 90-degree banjo end with o-rings; a M8x.75 inline fitting kit; and tubing/fitting boot
- choose stainless-steel or aluminum banjo kits (tubing kits for '03/04 Juicy with M8x1.0 fittings are no longer available)
- Juicy 3 kit includes: 1) 2000mm tubing; 2) threaded hose barbs; 2) compression ferrules; and 2) M8x.75 compression nuts
- CODE kit includes: 1700mm or 2200mm tubing with CODE-specific banjo; M8x.75 inline fitting kit; and CODE-specific and tubing/fitting boot
|
$8.95 |
|
Avid Juicy/Code/Elixir Disc Brake Bleed Kit
- Includes: (2) bleed syringes, (2) fitting/clamp tubes, (2) compression ferrules, (2) barbed tubing inserts, (1) Torx-T25 L-wrench, (1) 3/8"-drive 8mm crows-foot, (1) 2oz bottle of DOT-5.1 brake fluid, and instructions for bleeding Avid Juicy, Code, and Elixir hydraulic disc brakes
|
$47.00 |
|
Avid Master Cylinder/Lever Assemblies
- Includes: 1 complete brake-lever/master-cylinder assembly with lever blade (no hose or hose-mount fittings: sold separately)
- Flip-flop design: can be used for left or right
- Newer-year models can be used to retrofit/upgrade older systems
- Levers labeled as (MM) have a removable split clamp and are Match-Maker compatible (Match-Maker clamp kit sold separately)
|
$50.00 |
|
Avid Complete Calipers
- Complete caliper replacement for Avid hydraulic disc brake systems
- Calipers are 74mm post-mount to be used with applicable adapters
- Includes: caliper, bleed screw(s), pistons, and brake pads (no tubing attachment parts, see hose kit and/or fittings)
|
$58.95 |
|
Avid Caliper Parts
- Service parts for Avid hydraulic disc brake calipers
- Most kits are for (1) caliper (except where noted)
|
$4.00 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|
Avid Bike Disc Parts
