Paul Components bike parts

Top Paul Components Products

Paul Melvin Chain Tensioner - Machined aluminum tensioner bolt on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28mm chainline (from inside of dropout)

$69.95

Paul FHUB Front Hub - 6061 aluminum shell with oversized 7075 aluminum axle - Adjustable double sealed cartridge bearings and labyrinth seals. 135g

$91.95

Paul WORD 1-Speed Rear Hub - 6061 aluminum shell with oversized 7075 aluminum axle - Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel - Large 8mm bolts and knurled washer face for maximum hold - Accepts 24tpi BMX freewheels. 195g

$102.95

Paul Disc FHUB Front Hub - Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel. 181g

$117.95

Paul High Flange Hubs - Hollow stainless axles with retro high flanges - Flop-Flop rear is fixed one side and freewheel other - Stainless mount screws and washers with front and rear(lockring included) - Front 100mm and rear available in 120mm or 130mm - 270g, 390g

$95.95

Paul Thumbies Thumb Shifter Mounts - For use with Shimano bar-end shifters to create top mount shifters - Compatible with 8, 9 and 10 speed Shimano indexed bar end shifters (BS64/77/78) - 22.2mm clamp for mountain bars (not on bulge). Shifters not included

$50.95

Paul Racer Center Mount Brakes - Long reach centerpull brake, includes mounting hardware - Reach adjustment between 45 and 77 millimeters from mounting hole

$108.95

Paul Neo-Retro Cyclocross Brake - Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers

$88.95

Paul MotoLite Linear Brake - Reversible 6061 aluminum arms for left or right cable routing - Quick release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware

$108.95

Paul Cross Levers - Option for those wanting to brake with hands are on top of drop bars - Inline cable/housing-mounting allows for use of these (Cross) levers in conjuction with Drop/STI levers - Hinged clamp installs without removing bar tape or levers - (2) pivot pin positions for V-brake or regular cantilevers

$102.95

Paul E-Lever - Specifically designed to keep a clean look on a brake equipped fixie - Ergonomic one finger design - 23.8mm fits the upper flat of the bar next to the bulge, 22.2mm fits standard 7/8" bars - Uses MTB style brake cable(not included) - Sold each

$53.95

Paul Compact Love Levers - Ergonomic one finger design with adjustable reach - Hollow-lite tubular pivot pin - CNC machined aluminum lever set

$101.95

Featured products

• Delta Airzound Bike Horn 
  - 115 decibel horn with volume control switch
  - Mounts to most handlebars. No batteries needed
  - Air reservoir is easily refilled with any bike pump
  - Extension allows for more versatility when mounting system
• Campagnolo BIG Corkscrew 
  - A true classic, and symbol of genius for an iconoclastic brand
  - Patented telescopic, self-aligning system always centers the screw in the center of the cork
  - Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
  - Includes a wooden case with vinyard-esque packing material
• Kenda Standard Butyl Tube 
  - Standard .85mm wall thickness butyl tube
• Maxxis Xenith 26" Tire 
  - Mountain bike specific slick tire for 26" cross training
  - 60 tpi casing, 70a durometer: Durable, fast rolling compound
• Planet Bike Freddy Fenders Hardcore Fender Set 
  - Superflex unbreakable all-weather polycarbonate
  - Pre-installed stainless steel hardware with mud flaps
  - Includes all hardware for mounting to virtually any bike
• OURY Grips 
  - Thick profile and raised square blocks with a sticky feel, 98g