Bicycle PartsLoctite bike parts

Loctite categories

Top Loctite Products
Loctite 7649 Primer-N Prep image Loctite 7649 Primer-N Prep

- Acetone-based primer used to surface-prep metals for Anaerobic thread/retaining compounds (e.g. 222/242/262)
- Speeds cure time and ensures proper interface between bonding surfaces by removing contaminants
- Clear/Green liquid with 30-70 second dry time
- Law prohibits ORM-D materials from shipping by air

Loctite Threadlocker image Loctite Threadlocker

- Loctite thread/retaining compounds
- Purple: low-strength for smaller fasteners. Can be separated using hand tools (good spoke prep)
- Blue: general/medium-strength "removable" thread locker for most bicycle applications. Can be separated using hand tools (also offered in 'oil-resistant' formula for use on non-primered surfaces)
- Red: permanent/high-strength thread locker for most bicycle applications. Can be separated using hand tools and directed +300F-degree heat source
- Green: designed for cylindrical parts bonding (e.g. cartridge bearing to pivot-axle) high-strength yield = usually requires +300F-degree heat source and tools for removal (should not be used on commonly adjusted fasteners, this compound should be viewed as a permanent set)
- 30 minute dry time with 24-hour to full cure

Loctite Form-A-Thread Repair Kit image Loctite Form-A-Thread Repair Kit

- Form-A-Thread stripped thread repair kit
- Permanently repairs stripped threads and fasteners
- Works on threads up to SAE Grade-5 and/or 8.8 metric
- Allows up to 128 ft-lb torque applications once cured
- Dual-compound "mixing" formula and cure compounds
- Instructions, applicator, and mixing tools included
- Five minute fix

Loctite 660 Quick-Metal Gap Filler image Loctite 660 Quick-Metal Gap Filler

- Creamy, non-running gel compound used to fill surface imperfections and repair worn areas
- Use to "gap-fill" press-fit parts and obtain the full-contact fit required for proper part mating (headsets, BMX bottom-brackets, cartridge bearings, etc)
- Cures to strength double of standard press-fit
- 10 minute fixture set with full-cure within 24 hours

3M Scotch Vinyl Electrical Tape image 3M Scotch Vinyl Electrical Tape

- High quality vinyl tape for securing handlebar tape and other shop uses

Featured products
  • Delta Airzound Bike Horn 
    - 115 decibel horn with volume control switch
    - Mounts to most handlebars. No batteries needed
    - Air reservoir is easily refilled with any bike pump
    - Extension allows for more versatility when mounting system
  • Campagnolo BIG Corkscrew 
    - A true classic, and symbol of genius for an iconoclastic brand
    - Patented telescopic, self-aligning system always centers the screw in the center of the cork
    - Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
    - Includes a wooden case with vinyard-esque packing material
  • Kenda Standard Butyl Tube 
    - Standard .85mm wall thickness butyl tube
  • Maxxis Xenith 26" Tire 
    - Mountain bike specific slick tire for 26" cross training
    - 60 tpi casing, 70a durometer: Durable, fast rolling compound
  • Planet Bike Freddy Fenders Hardcore Fender Set 
    - Superflex unbreakable all-weather polycarbonate
    - Pre-installed stainless steel hardware with mud flaps
    - Includes all hardware for mounting to virtually any bike
  • OURY Grips 
    - Thick profile and raised square blocks with a sticky feel, 98g
BikeParts360. We are located at Key West, stands 100% behind