Top DMR Products
|
DMR Exalt Frame
- Long-travel ready hardtail can be used with forks up to 170mm travel!
- Oversize heat treated 4130 CrMo tubing, S-bend stays
- SwopOut Dropout System: convertible dropouts allow use of 10mm vertical (included) or horizontal, 14mm horizontal or 12mm thru-axle
- International Standard disc mounts and ISCG-05 tabs included. 7.0lbs
|
$384.95 |
|
DMR Trailstar Frame
- The classic Trailstar can now be used with forks up to 130mm travel, and be run with gears or singlespeed
- Oversize heat treated 4130 CrMo tubing, S-bend stays
- SwopOut Dropout System: convertible dropouts allow use of 10mm vertical (included) or horizontal, 14mm horizontal or 12mm thru-axle
- International Standard disc mounts and ISCG-05 tabs included. 6.5lbs
|
$384.95 |
|
DMR Sidekick Frame
- Quick handling hardtail for use with 90-110mm travel forks, great for everything from jumping to 4X
- Oversize heat treated 4130 CrMo tubing, S-bend stays
- SwopOut Dropout System: convertible dropouts allow use of 10mm vertical (included) or horizontal, 14mm horizontal or 12mm thru-axle
- International Standard disc mounts and ISCG-05 tabs included.
- Limited edition Irish Green finish. 6.5lbs
|
$355.95 |
|
DMR SwopOut Dropout Kit
- Replacement dropouts for 2007-2008 SwopOut compatible DMR frames (Exalt, Trailstar, Sidekick)
- Sold as left/right pairs
|
$39.95 |
|
DMR Chain Reactor
- Device locks chain onto a single front chainring via guide roller with cartridge bearing
- Machined aluminum arm attaches to ISCG-05 3-bolt bottom bracket mount
|
$30.95 |
|
DMR Tension Seeker 2 Chain Tensioner
- Features anti-derailment guards that encase the pulley
- Tensioner allows the use of a 1 speed drivetrain on a vertical drop frame
- Mounts to derailleur hanger with double sealed pivot bearing
- Pushes down or up on the chain using an adjustable tension linear spring
- Alloy pulley with sealed cartridge bearing
- Also useful for internally geared hubs
|
$57.95 |
|
DMR STS Chain Tensioner
- Simple Tension Seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame
- Perfect for Street or Dirt Jump where simplicity and durability is key
- Stainless steel arm mounts to derailleur hanger and dropout
- Loosen bolt and swing down and back to adjust chain tension
- High density polyurethane pulley with sealed cartridge bearings
- Optional: STS blister packaged with 1-speed Conversion Kit containing 1) 16t HG cog, lockring and 3 spacers to replace any 8/9sp cassette
|
$23.95 |
|
DMR Chain Tugs
- Axle tensioners for horizontal dropout frames, keyed to fit into dropout
- Mech Hanger version has a derailleur hanger and includes a non-drive side tug. They are keyed for 10mm dropouts with 10mm axle hole
- 10mm version is keyed for 10mm dropouts with 10mm axle hole
- 14mm version is keyed for 14mm dropouts with 14mm axle hole and includes reducers for running a 10mm axle in a 14mm dropout
|
$10.95 |
|
DMR V-Series Pedals
- V-12 Mag: lightweight magnesium body, durable chrome plated CrMo axle with smooth sealed cartridge bearings
- V-12: aluminum body, durable chrome plated CrMo axle with smooth sealed cartridge bearings
- V-8: aluminum body (same as V-12), CrMo axle with precision ground adjustable bearings, grease ports (injection syringe included)
- All feature replaceable traction studs, V-12s have 10 per side, V-8s have 4
|
$31.95 |
|
DMR Wingbar Alloy Riser Bar
- Heat treated, double butted 6061 aluminum with laser etched logos
- Center bulge extends all the way through the bends for greater strength
|
$32.95 |
|
DMR Headstock Stem
- Premium quality, CNC machined stem ideal for hardcore riding styles
- Twin collet locking system means there are no bolts or weak points at the rear of the stem
|
$57.95 |
|
DMR Loc'd Grips
- Kraton rubber DMR DD logo pattern, staggered in height for added grip
- Easy to install via two set screws that clamp via an alloy ring/steel sleeve expander, which firmly grips the bar without damaging it
- Soft outer rubber also grips the bar through windows in the stiff plastic core to eliminate twisting
- Micro flange for added steering control without shifting conflict
|
$11.95 |
|
DMR Trailblade-2 20mm Disc Fork
- Heat treated 4130 CrMo jump fork for 26" wheels, suspension corrected (@100-110mm travel)
- Includes aluminum 20mm axle spaced for 110mm through-axle hub
- 1.5" offset peg mount dropouts with Peg-Lock system
- 51mm International Standard disc brake mounts with guide on upper leg (no brake studs)
|
$217.95 |
|
DMR Longhaul Saddle
- Lightweight Freeride saddle with leather top and Kevlar sides
- Wide, padded nose and light, plush dual density foam
- Fulcrum suspended 8mm rails for comfort
|
$57.95 |
|
DMR Dirt Jump Saddle
- Thick padding with Kevlar edges for crash protection
- 8mm steel rails. Front and rear plastic bash guards
|
$18.95 |
|
DMR Revolver Disc Hubs
- DMR disc hubs are built precise, lightweight and tough
- Front 9mm hub is quick release only (no bolt-on option)
- 3-pawl rear freehub with sealed cartridge bearings, bolt-on axle (also Q/R compatible)
- All have forged 6061 aluminum body with sealed cartridge bearings and International Standard 6-bolt disc rotor mount. 180/208/385g
|
$56.95 |
|
DMR Revolver-SS Disc Hubs
- Bolt-on 10mm or 14mm nutted steel axle hub, built tough to take Dirt Jump and Singlespeed abuse
- 14mm axle model great for running pegs
- Forged 6061 aluminum body with wide flanges builds a zero dish wheel
- 24tpi freewheel threading, double sealed bearings
- International Standard 6-bolt disc rotor mount. 288/434g
|
$65.95 |
|
DMR Revolver 6-Pawl Disc Hubs
- 6-pawl design means larger cartridge bearings in the freehub for a significant increase in hub longevity
- 6 double toothed pawls housed in the hub shell engage with the ratchet ring on the cassette for greater pawl contact, less wear and a better seal
- Forged 6061 aluminum body with 5 sealed cartridge bearings
- Through-axle models include axle and nuts
- International Standard 6-bolt disc rotor mount. 345g (10mm)
|
$173.95 |
|
DMR Revolver-SS 6-Pawl Disc Hubs
- Super durable Jump/Singlespeed hubs
- 6 double toothed pawls housed in the hub shell engage with the ratchet ring on the cassette or driver for greater contact, less wear, and a better seal
- Choose 13t cassette (10mm axle) or mini 11t 1-piece driver (14mm axle)
- 14mm axle model great for running pegs
- Forged 6061 aluminum body with 4 sealed cartridge bearings
- International Standard 6-bolt disc rotor mount. 359/450g
- 12t, 14t, 16t, 18t sprockets available separately for cassette hub only
|
$130.95 |
|
DMR Digger 26" Tire
- Motocross style block tread for good dirt penetration, cornering bite
|
$26.95 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|