CTS Disc Tab Facing Tool
- Faces fork and frame disc tabs (100mm-Q/R, 20mm-T-A, 135mm-Q/R, and 150mm-T-A with 12mm non threaded axles)
- Helps eliminate brake-sqeal due to mis-aligned calipers
- Improves brake performance and feel
- Increases pad life and reduces bedding-in time
|
$203.95 |
Hayes Brake Tools
- HY-8035: service tool for removing/installing the torx-shaped piston-bore cap on El Camino monoblock calipers
|
$8.95 |
Hope Spot Disc Tab Facing Tool
- Faces fork and frame disc tabs (100mm-front Q/R; 20mm-front T-A, BoXXer-front T-A; and 135mm-rear Q/R)
- Aligment block pre-drilled for specific fork/frame tab alignments
- Includes dummy axles for Q/R and T-A fork, and Q/R frame fitment
- Helps eliminate brake-squeal due to mis-aligned calipers
|
$115.95 |
Hope Piston Bore-Cap Tools
- Service tool for removing/installing the torx-shaped piston-bore cap on Hope Mono-series and Moto monoblock calipers
|
$13.95 |
Magura Tubing Insert Tools
- Various tools for securing hydraulic tubing while installing reinforcement (barbed) needle/inserts
|
$15.00 |
Morningstar R2OC-TECH Rotor/Rim Alignment Gauge
- Precision alignment gauge with dial indicator for measuring disc rotor and rim trueness
- Kit (+ gauge) mounts to quick release dropout/skewe, requires M5x.8mm threaded quick release skewer (sold separately)
- Adapters available to mount to Park truing stands, Lefty or thru-axle forks. Measures all rotor and rim sizes
|
$28.95 |
Park Tool Disc Tab Facing Tool
- Ensures optimal disc brake function by machining the face of each mounting tab, removing paint and material to create a flat, parallel surface
- Doing so minimizes squeal or uneven pad wear and increases braking power
- Works on 135mm spacing frames with the standard 10mm dropouts and fits 12mm thru-axle frames by using a spacer included with the kit
- Also works on front forks with standard 9mm axle dropouts and with 20mm thru-axles by using a spacer included with the kit
|
$130.95 |
Park Tool Rotor Truing Gauge
- For use with TS-2 Professional Wheel truing stand to accurately gauge rotor straightness. Works with any size rotor
- Features an infinitely adjustable, finely threaded indicator gauge
|
$31.95 |
Shimano CenterLock Rotor Lockring Tool
- For installing/removing lockrings for HG/IG cassettes and CenterLock disc brake rotors
- Includes guide pin for hollow quick release axles (1/2" drive has no pin)
|
$10.95 |
Shimano Disc Brake Tools
- Vise clamp blocks for use in modifying tubing length on Shimano hydraulic tubing kits. Secures tubing for cutting and barb installation
|
$6.95 |
SRAM PitStop Hydraulic Tubing Cutter
- Shop quality bench top hydraulic tubing cutter
- Provides a fast, clean cut, even through Kevlar sheathing (not recommended for stainless-braided tubing)
- Comes with 2 blades (extra/spare blades available separately)
|
$6.00 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|